Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Access Control for Burbank Homeowners
Gate access control in Burbank means deciding who gets onto your property and who doesn’t, without leaving the house. Most systems we install in the area are either a keypad mounted at the driveway, a card reader tied to an existing gate motor, or a smart system you control from a phone. If your current setup is a home gate that only opens with a remote you keep losing, that’s not access control; that’s a convenience that stops being convenient the moment the remote disappears. Vance Gate Repair Burbank has installed and serviced access systems on properties across Burbank since 2014, and every job starts with a written price before anyone touches a wire.
Call (213) 577-1120 and you’ll speak to a live person in Burbank, any hour of the day or night. We don’t use answering services, and we don’t route calls to a call center outside the state. The dispatcher who answers knows gate access systems well enough to ask the right questions, schedule the visit, and tell you the name and photo of the technician who will show up before they arrive.
What Our Gate Access Control Service Includes
Access control isn’t one product. It’s the layer of hardware and logic that decides when the gate opens, for whom, and under what conditions. Below is what we actually do for Gate Access Control in Burbank, broken out by the type of system you have or want.
Keypad Entry
A keypad entry system replaces the remote with a code, sometimes four digits, sometimes longer, depending on the panel. You press the code, the gate opens, and you never dig through the glove box for a clicker again. We install weather-rated keypads on the driveway post or a pedestal, wire them into your existing gate motor (LiftMaster, FAAC, BFT, and the rest), and set the code with you standing there during the visit. If you want a visitor code that works for a week and then deletes itself, we set that up before we leave and show you how to change it yourself.
Remote Control
Remote control is the baseline that almost every Burbank gate starts with: a transmitter in the car, a receiver in the gate operator. We pair new remotes, replace worn-out ones, and troubleshoot when a remote that worked last week stops working today, which is usually a dead battery, a corrupted receiver memory, or interference from something like a nearby radio tower. When we visit, we photograph the receiver board and log the dip switch or rolling-code setting so the record is there on future visits. We stock remotes for every major brand, including Linear and Viking, so you’re not waiting on a shipped part.
Phone Entry
Phone entry connects the gate to your phone line or cellular network. A visitor drives up, presses the call button, and the system dials your phone; you press a key to open the gate. This is the standard choice for Burbank properties where someone wants to talk to a visitor before letting them in, like a house with a long driveway or a small commercial yard. We handle the wiring from the call box to the gate operator, set up the cellular modem if there’s no landline, and test the call with you using our own phone before we call the job done.
Card Reader
A card reader system uses RFID cards or fobs: hold the card near the reader, the gate opens. HOA communities in the area use this style of system heavily because it’s easy to deactivate a single card when a resident leaves. For a single-family home, card readers also make sense if you have a nanny, a pool service, or a gardener who needs recurring access. We install standalone readers or integrate them with an existing access controller, and we program and deactivate cards on site. The system can store access logs that show exactly when each card was used, which is useful if a package disappears and you want to know who came through the gate that afternoon.
Video Intercom
A video intercom adds sight to the entry decision: a visitor presses the button, a camera feeds your phone or an indoor monitor, and you see and hear who is at the gate before opening. We install wired and wireless video intercom systems, and on most jobs we recommend wired for the video feed; wireless video degrades faster in a driveway that sees direct sun all afternoon in Burbank. You can have the system ring your smartphone, an in-wall monitor, or both. We set it up, test the app with your phone on site, and leave you with the login credentials and a written record of every device on the system.
Smart Access
Smart access ties the gate into an app, usually over Wi-Fi or a cellular bridge, so you can open the gate from anywhere with a phone. Most smart systems also support scheduled codes, remote unlock, and activity notifications. We install and configure smart controllers from brands like Ghost Controls and DoorKing, connect them to your home network, and make sure the system still opens the gate if the internet goes down, because a smart gate that bricks itself when Wi-Fi drops is not an upgrade, it’s a downgrade. You get a laminated card with the credentials, the app name, and a phone number to call if anything goes sideways.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Access Control
FAAC systems are built around hydraulics and Italian engineering; the control boards are finicky about voltage and grounding. We’ve worked on hundreds of FAAC units in Burbank and the surrounding valleys, including Sun Valley Gate Access Control jobs, and our techs know what a failing capacitor sounds like before it dies completely. We stock FAAC OEM boards, remote receivers, and photocells, and we’ve rebuilt more FAAC control panels than any other single brand in our service area.
BFT is the workhorse of apartment and condominium gates in Los Angeles County. BFT access systems often run on 24-volt logic with proprietary connectors, and the most common failure we see in Burbank is a blown accessory fuse taking the keypad and loop detector down with it. We service all BFT control boards, swing and slide operators, and plug-in receivers, and we keep the documentation from every BFT job in the file so the next technician isn’t guessing at the programming sequence. Whether your property has BFT, Linear, Viking, or any other make on the market, we work on the motor you already own, not the one we’d rather sell you.
BeforeAfterSigns You Need Gate Access Control Right Now
- The remote opens the gate for anyone who finds it. A lost remote means anyone who picks it up can open your gate until you re-pair the receiver and wipe the old code. If a remote went missing in the last week, the fix is a re-code and a new remote, not a shrug.
- You’re giving out keys to a gate that shouldn’t have keys. Physical keys get copied. A code or a card can be deleted. If your property switched to key access because the old remote system failed, that’s a security downgrade sitting on a hinge.
- The keypad works sometimes. Intermittent keypad failure is usually a worn membrane, a corroded wire behind the panel, or a power supply on its last legs. The problem is that “sometimes” never happens when you have groceries in the car and it’s raining.
- You can’t see who’s at the gate from inside the house. If the doorbell rings and you have to walk outside to check who’s there, you don’t have a gate access problem; you have a visibility problem. A video intercom solves that in an afternoon.
- Your gate opens for everyone or no one. A gate stuck open is an invitation; a gate stuck closed is an inconvenience that becomes a hazard. Both conditions point to the same root cause: the access logic isn’t doing its job, and the system needs diagnosis.
Our Gate Access Control Process - Step by Step
- 1
The written estimate, before any work. A technician arrives in Burbank, walks the property with you, and hands you a written scope of work with a flat price. You sign it or you don’t. Nothing gets installed until you’ve agreed to the price in writing, which is the entire point of Haven Standard Clause 1.
- 2
System diagnosis and existing-equipment check. We test the gate motor, the existing access hardware, the wiring from the house to the gate, and the power supply. On most access control jobs, the problem is upstream of the new hardware: a strained wire, an undersized transformer, a control board that’s seen better days. We document those findings with photos before we propose a fix.
- 3
Installation and programming. We mount the hardware, run the wire, land the connections on the gate operator control board, and program the codes, cards, or app credentials with you watching. If the system requires network access, we connect it, test the app, and run through a full open/close cycle from every entry point so there’s no ambiguity.
- 4
Documentation and walkthrough. Before we leave, you get a photo log of every connection, every setting change, and every part installed, plus a written rundown of how the system works and how to add or delete users. The same documentation is filed in our job record for every future visit. Under Haven Standard Clause 4, this record is included on every single job.
- 5
The 365-Day Done Right Promise. If anything we installed or adjusted fails inside a year, we come back and make it right. No argument, no fee, no fine print about weather or wear and tear. The promise is on the written estimate, in the job record, and it’s honored the same way on day 364 as on day one.
How Much Does Gate Access Control Cost in Burbank?
A keypad entry system in Burbank typically runs $400 to $900 installed, depending on whether the existing wiring is intact and what style of keypad you choose. For more details, see our Gate Access Control pricing guide. A phone entry system with a call box and cellular dialer lands between $1,200 and $2,400, with the cellular modem accounting for most of the difference. A video intercom with a camera call box and a smartphone app is a $1,800 to $3,500 job on most properties in the area, depending on how much wire we have to run. These are flat prices written on the estimate before any work starts, not hourly guesses.
What changes the price: the condition of the existing gate operator, the distance between the access hardware and the control board, whether there’s power at the gate location, and whether you want the system tied into a smartphone app or something simpler. A free estimate in Burbank includes the full walkthrough, the written quote, and our recommendations on what you actually need versus what you can skip. You’ll never be invoiced for a total that wasn’t agreed to in advance.
Gate Access Control Near Burbank - Our Service Area
We install and service gate access control systems throughout Burbank and into North Hollywood, Sun Valley, Tujunga, Studio City, and Van Nuys. Same-day and next-day appointments are available for most access control calls, and our Burbank-based technicians are on the road in the Valley every day, which keeps response times short. If your property is in Gate Access Control in North Hollywood or Gate Access Control in Sun Valley, the same written-price and photo-documentation standard applies on every visit.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Access Control in Burbank
Gate access control is any system that decides who can open a gate and when. It includes keypads, remote controls, phone entry, card readers, video intercoms, and smart app-based systems, all wired into the gate operator. The goal is simple: authorized people get through easily, everyone else stays out, and you have a record of what happened.
Most standalone keypad and remote system installations take between two and four hours. A phone entry system or video intercom with new wiring typically takes four to eight hours, depending on how much trenching or conduit work is involved. If the existing wiring is intact, the job moves much faster, and we’ll tell you after the walkthrough whether we can finish the same day. Call (213) 577-1120 and we’ll give you a straight answer on timeline for your specific property.
Expect $400 to $900 for a keypad system, $1,200 to $2,400 for phone entry, and $1,800 to $3,500 for a video intercom with app access. The price depends on what’s already at the gate, how far the wiring has to run, and what you want the system to do. Every estimate is written, flat, and agreed to before any work begins.
Yes, we service FAAC and BFT systems extensively in Burbank and across the San Fernando Valley, including Gate Access Control in North Hollywood. FAAC boards are common on larger residential properties; BFT systems show up on condominium and apartment gates. We carry OEM parts for both brands and keep documentation on every job so programming changes don’t have to be rediscovered by the next technician.
For emergency conditions like a gate stuck open with no way to secure the property, we dispatch same-day in Burbank whenever a technician is available. Our dispatch line is staffed live 24 hours a day, so you’ll know immediately whether same-day service is possible. Call (213) 577-1120 and tell us what’s happening; we’ll be honest about when we can get there.
Everything we install and every adjustment we make is covered by the 365-Day Done Right Promise. If the access system fails within one year, we return and fix it at no charge. The promise is written on every estimate, and there’s no fine print about weather conditions, user error, or anything else.
Clear the area around the gate and the driveway keypad location so the technician has room to work. Keep the gate on manual mode if it’s currently stuck, and have your Wi-Fi network name and password ready if you’re getting a smart system. We handle the rest, and we’ll leave the work area as close to the way we found it as the job allows.
Schedule Your Gate Access Control Service in Burbank Today
Call (213) 577-1120 for a free, no-obligation estimate on any gate access control project in Burbank. A live person answers around the clock, a written price is delivered before any work starts, and every job ends with a documented record of what was done. You don’t need to decide today; you just need to find out what the job will cost.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Burbank since 2014.