Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHinge & Post Repair in Burbank, CA
Hinge and post repair in Burbank typically costs between $350 and $950, depending on whether the repair requires welding, structural concrete work, or simple hardware replacement. Because we operate under the Haven Standard, we provide a written scope of work and a fixed price before any technician picks up a tool. If your gate is dragging, grinding, or failing to latch, the issue usually stems from a failing hinge or a shifting post, both of which we address with gate repair expertise and documented precision. To discuss your specific gate failure, call us at (213) 577-1120 for a free estimate.
We are Vance Gate Repair, and we handle gate systems differently than most companies. We do not offer verbal estimates or handshake agreements. Every visit we make to a property in Burbank includes a documented photo record of what we found, what we adjusted, and what we replaced. This allows us to stand behind our work with a 365-Day Done Right Promise. Whether you are dealing with a heavy swing gate that has pulled away from a concrete pillar or a sliding gate that has sheared a mounting bracket, we provide the technical documentation required to ensure the repair lasts. If you are looking for general maintenance, you can review our main Gate Repair in Burbank service page for a broader look at our capabilities.
When You Need Hinge & Post Repair
The hinge and the post are the two most critical structural components of any gate system. In Burbank, we often see issues caused by the specific soil conditions in the hills and the constant expansion and contraction of metal hardware in the Southern California sun. If you notice any of the following symptoms, your gate system is likely experiencing structural fatigue that requires professional intervention.
- The gate is dragging on the driveway: This is almost always a sign that a hinge has fatigued or the post has deflected. If the gate drags, it puts excessive strain on the motor arm, which can lead to premature motor failure.
- Visible separation between the post and the gate: If you see a gap appearing at the hinge point, the mounting bolts may be pulling through the steel, or the concrete footing around the post may be compromised.
- The gate makes a grinding or popping sound during operation: This indicates that the hinge bearings are worn out or that the weight of the gate is no longer being distributed evenly across the pivot points.
- The latch does not align with the catch: When a gate post leans, even by a fraction of an inch, the latch mechanism will fail to engage. We often see this in older homes where the original installation has settled over time.
- Metal fatigue or cracking around weld points: On steel gates, the stress of constant opening and closing can cause the welds connecting the hinge to the frame to crack. This is a safety hazard that requires immediate professional welding.
- Excessive vibration during movement: If the gate shakes as it opens or closes, the post is likely not anchored securely in the ground, or the hinge hardware has developed too much play.
If you observe these issues, avoid trying to force the gate closed or propping it up with temporary supports. A heavy steel gate that loses its structural integrity can pose a significant safety risk. We recommend keeping the gate in its current position and calling us at (213) 577-1120 to have a technician inspect the pivot points and the anchoring system safely.
Our Hinge & Post Repair Process
We approach every repair with the same methodology that Adrian Vance developed while working on commercial access-control sites. Our goal is not just to get the gate moving again, but to restore the system to a state where it operates smoothly and safely. Our process is transparent and documented under Clause 4 of the Haven Standard.
- Initial Assessment and Documentation: Upon arrival, we photograph the current state of the hinge, the post, and the surrounding concrete. This photo record is part of your job file and helps us identify exactly why the failure occurred.
- Structural Analysis: We test the gate for plumb and level. We check if the post has shifted in the ground or if the hinge hardware itself has failed. We inspect brands like FAAC, BFT, and Linear to ensure we use the correct replacement parts that match your existing system.
- Written Scope and Pricing: Before we begin, we present a written document outlining the required repairs and the exact cost. You will know the price before we tighten a single bolt.
- Repair Execution: Depending on the issue, we may replace worn-out hinge bearings, weld new mounting plates onto the post, or reinforce the post-to-gate connection. If the post itself is failing, we assess whether it can be braced or if it requires resetting.
- Final Verification: Once the repair is complete, we perform a series of tests to ensure the gate moves without resistance. We document the final alignment and the new hinge settings in your service record.
- Completion Record: We leave you with a copy of the documentation, including photos of the new installation, ensuring you have a clear record of the work performed for your home files.
You can find more information about our broader service approach on our home page. We believe that if a repair is documented correctly, it should not need to be redone. That is why we provide a 365-Day Done Right Promise on all completed hinge and post work.
BeforeAfterHinge & Post Repair Pricing in Burbank
We believe in upfront pricing. We do not provide vague estimates over the phone that balloon into larger invoices once we arrive. The cost of hinge and post repair in Burbank depends on the complexity of the gate material and the extent of the structural damage. We use the following guidelines to determine your flat-rate price.
- Minor Hinge Adjustment and Lubrication: For gates that have simply settled and require realignment or new ball bearings, pricing typically starts at $350.
- Weld Repair for Hinges or Brackets: If the structural integrity of the hinge bracket has been compromised and requires professional welding, the cost typically ranges from $450 to $750, depending on the volume of steel work required.
- Post Reinforcement or Resetting: If the post has shifted and requires bracing or re-anchoring in the concrete, prices generally range from $600 to $950. This accounts for the specialized equipment needed to secure the post in Burbank soil.
Every quote we provide includes the cost of parts, labor, and the documented photo record required by the Haven Standard. If you have received a written estimate from another company, we are happy to provide a free second opinion. Bring the paperwork to your appointment, and we will review the scope of work at no cost to you. To get an exact, written quote for your property, call us at (213) 577-1120.
FAQs - Hinge & Post Repair
Can you repair a gate hinge if it is welded to the post?
Yes, we are equipped to handle welded gate hardware. If a hinge has broken off or the weld has cracked, we provide weld & rust repair by grinding the old material down, prepping the surface, and welding the new hinge or bracket back onto the post. We ensure the new weld is structurally sound and aligned properly to prevent the gate from dragging again.
Is it cheaper to repair the post or replace the whole gate?
In most cases, repairing the post is significantly more cost-effective than replacing the entire gate system. Unless the gate frame itself is severely rusted or bent beyond repair, we can usually reinforce the existing post or install a new mounting system that restores full functionality, avoiding the need for lock repair or more extensive work. We will always provide a transparent assessment of whether a repair is the right financial choice for your specific situation.
Do you work on Viking or LiftMaster gate systems?
Yes, we service nine major automation brands, including Viking, LiftMaster, FAAC, BFT, Linear, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether your hinge failure is affecting the motor or just the physical swing of the gate, we have automatic gate repair experience to work on these systems without needing to replace the entire motor unit.
How quickly can you come out to Burbank for a hinge repair?
We answer our phones 24 hours a day, 7 days a week, so you can contact us at any time to schedule a visit. Because we are locally based, we can often schedule a technician to come out and provide a written estimate for your hinge or post repair on a timeline that works for your schedule. Call us at (213) 577-1120 to set up a time.
Written by Adrian Vance, Owner at Vance Gate Repair Burbank, serving Burbank.