Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
A new driveway gate in Beverly Hills typically costs $4,800-$14,500 for a standard automated swing or slide system, and most installations take two to three days once permits clear and materials arrive. The hillside streets north of Sunset and the estate lots in Trousdale change the math: custom ironwork, sloped-grade operators, and Crestron or Control4 integration push larger projects past $25,000. We write the price down before any work starts, and we hand it to you before a single tool comes off the truck. Call (213) 577-1120 to schedule a site walk.
Beverly Hills has arguably the highest concentration of custom-fabricated, architecturally designed automated estate gates in the country. That means the gate on your property wasn’t picked from a catalog. It was drawn, fabricated, and hung for that opening, that grade, that home. Our job is to install it so it works every time, holds its line on a slope, and doesn’t fight the automation. We’re in Beverly Hills regularly, our crews know the local permitting path, and we don’t guess when a driveway hits 10% grade or more. We measure, we calculate the load, and we size the operator with the right brake.
Why Vance Gate Repair Burbank Is Beverly Hills’s Preferred Gate Installation Company
We show up with the paperwork. A written scope, a written price, and a photo record of the job when we leave. That’s the Haven Standard, and it applies to every gate we install in Beverly Hills, from a pedestrian gate off a Rodeo Drive-adjacent walkway to a full double slide gate on a Trousdale canyon lot. Clause 1 says have it in writing. We do.
Since 2014, Adrian Vance has built this company on documentation habits from commercial access-control work. Every Beverly Hills installation ends the same way: a photo log of what was installed, the wiring diagram, the limit-switch settings, the part numbers. You don’t have to trust that we did the work. You can see it. And if something isn’t right, the 365-Day Done Right Promise means we fix it within a year, no argument, no fee.
Our phone is answered by a live person at any hour. Not a machine. Not a callback window. If your gate won’t close on Canon Drive at midnight, a real person picks up. Uniformed, background-checked technicians come to Beverly Hills with name and photo sent to you before arrival. That matters when someone is working on a gate that protects a multi-million-dollar property.
We service nine major automation brands, including FAAC, BFT, and Viking. If your existing motor is a BFT swing operator and a new panel needs integration, we don’t pressure you into replacing the whole system. We fix, integrate, or install what’s actually right for the job.
Our Gate Installation Services in Beverly Hills
Driveway Gate Installation
A driveway gate in Beverly Hills starts with the grade. Long driveway runs in Trousdale or the hillside streets north of Sunset regularly exceed 10%, which changes operator selection completely. An undersized swing operator on a 12% grade will creep open under gravity, and that’s a failure waiting for the first Santa Ana wind event. We calculate the panel weight, wind load, and slope before recommending an operator. Then we write the price.
Pedestrian Gate Installation
Pedestrian gates in the Spanish Colonial and French Normandy estates south of Santa Monica Boulevard look simple and live hard. Years of dry-season dust, irrigation overspray, and shifting walkways put stress on hinges and locking hardware. We set pedestrian gates with proper post depth, check the strike alignment, and make sure the latch doesn’t fight the access control. A pedestrian gate integrated with a call box or keypad should open the same on day 300 as day one.
Sliding Gate Installation
Sliding gates suit Beverly Hills properties with long driveways and tight frontages, especially in the flats where setbacks leave no room for a swing arc. A properly installed slide gate needs a rack and pinion track that drains, rollers rated for the panel weight, and a motor sized for the total travel. Fine dust and eucalyptus debris from Beverly Hills’ dry season pack tracks and seize systems that weren’t installed with clearance in mind. We set clearance with that local reality, not a generic spec sheet.
Swing Gate Installation
Swing gates remain the most common gate type in Beverly Hills, especially the ornamental wrought-iron double gates on the estate properties along Sunset and in Trousdale. These panels are heavy, often custom-fabricated, and hard on operator gearboxes. We install swing gates with operators fitted with an external brake or worm-drive gearbox when the grade calls for it. That’s the difference between a gate that holds its line and one that slams shut at 2 a.m. when the wind catches the back panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Beverly Hills
We work on what’s reliable, not what’s cheapest to stock. FAAC hydraulic operators hold up well on heavy custom gates and are common on Beverly Hills estates, and we carry key parts and boards for them locally. BFT swing and slide operators cover a broad range of residential installs, and Viking slide operators handle the long travel and grade work we see on Trousdale driveways. If your current gate runs on another brand, ask. We service nine automation brands total, and we’ll match the operator to the gate that’s already on the property when that’s the smart move.
Common Gate Installation Problems We See in Beverly Hills Homes
- Gravity creep on hillside swing gates: A driveway over 10% grade will pull an improperly braked swing gate panel downhill. The operator fights the weight, the limit switch drifts, and the gate parks off-line. We size the brake or gearbox to the measured grade at install, not after the first failure.
- Dust-choked slide tracks from eucalyptus and dry-season debris: Beverly Hills properties with eucalyptus near the gate line get fine leaf litter packed into rack and pinion track. Without proper clearance and end-stop drainage, a slide gate operator burns out its clutch in under a year. We address this at installation.
- Santa Ana wind load on large custom swing panels: Canyon-facing properties north of Sunset take brutal gusts in the fall. If the hinge post is undersized or the operator lacks wind resistance programming, the panel sags and the opener overloads. We overbuild for wind on exposed lots.
- Access control integration conflicts: A Crestron or Control4 system sends a closure command, the gate operator replies on a relay that isn’t matched, and nothing moves. Beverly Hills estates run sophisticated automation more than anywhere else in LA. We bench-test the integration before the final walkthrough, and we leave a wiring diagram so the next technician doesn’t start from zero.
Pricing for Gate Installation in Beverly Hills, CA
You’ll want numbers. Here’s what Beverly Hills gate work actually runs, with the understanding that every site gets measured and every price is written before you commit.
- Pedestrian gate install (48″ wide, steel or aluminum): $1,800-$3,400
- Single swing gate, automated (12-16 ft panel, including operator and two remotes): $6,500-$11,000
- Double swing gate, automated (two panels, custom iron or aluminum): $9,000-$16,000
- Sliding gate, automated (up to 20 ft travel, rack and pinion with motor): $7,500-$14,000
- Custom estate gate with access control integration (Crestron/Control4, keypad, phone app): $18,000-$35,000+
What moves the price in Beverly Hills: panel weight and size, slope over 10%, wind exposure on canyon lots, custom fabrication time, and the automation brand already on the property. We quote the job in writing. No verbal estimate. That’s Haven Standard Clause 1, and it protects you the same way it’s protected 22,000-plus gates since 2014. Call (213) 577-1120 and we’ll schedule a site walk and give you a written number.
We Also Serve Cities Near Beverly Hills
If you’re in West Hollywood, Studio City, Sherman Oaks, or North Hollywood, we send crews from the same Los Angeles coordination office and hold the same written-price standard. You can read more about our Gate Installation work or see the full local breakdown at Gate Installation in Beverly Hills.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly Hills
Yes. Beverly Hills Building & Safety requires a permit for any motor replacement or structural modification to an automated gate. We handle the permit paperwork as part of the installation, and we’ve walked enough final inspections on hillside properties to know what the inspector checks. Call (213) 577-1120 and we’ll confirm permit scope for your specific gate before anything gets ordered.
A slide gate on a steep grade creeps when the operator’s brake is undersized or wasn’t configured for the slope. The weight of the panel works against the gearbox, and over time the gate drifts off the end-stop. On a Trousdale Estates property with a 14% driveway, our crew installed a custom double slide gate with a Viking operator and an external brake module to hold the gate static on grade. We also set the safety photocells at both ends of the rack and pinion track. That’s the fix: a matched brake, set and verified on the actual grade. Call (213) 577-1120 for a written diagnosis and repair price.
Only if the panel is matched to the daily duty cycle and the battery bank is sized for a few days without good sun. Canyon-facing Beverly Hills properties often get less winter sunlight than most people assume, and a heavy wrought-iron gate on a solar operator with an undersized battery will fail after a couple of cloudy days. We’ve installed solar on long driveway gates where mains were impractical, but the math has to be done honestly. Anyone who quotes solar without asking your gate weight, daily cycles, and sun exposure is guessing. We don’t guess. Call (213) 577-1120 for a real assessment.
For a gate panel wider than 10 feet in the sandy, well-drained soils common in the flats south of Santa Monica Boulevard, you want a footing at least 36 to 42 inches deep, with the post set in concrete and the panel weight factored into the diameter. Undersized footings are why wide gates sag and drag within a couple of seasons. We spec footings per panel weight and soil, not per a one-size table. If your gate already sags, we can reset the post and rebalance the hinges without replacing the panel.
The sag comes from hinge wear and post lean, and on older Spanish Colonial properties, the original posts often aren’t reinforced for a modern automated operator. The fix is a steel internal post core or a properly sized replacement post, plus hinge bearings rated for the panel weight. We also check what the added automation weight has done to the original ironwork. Address it before the sag gets bad enough to stress the operator. Call (213) 577-1120 and we’ll send a technician with a written repair scope.
Written by Adrian Vance, Owner at Vance Gate Repair Burbank. Adrian has overseen gate installations and access-control integration since 2014, with a focus on hillside estates and custom-fabricated gate systems.