Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Hollywood
Gate installation in North Hollywood usually runs $1,450-$4,800 for a standard driveway gate with automation, depending on the gate type, material, and whether we’re retrofitting onto existing posts or setting new footings. Most North Hollywood installs are completed in one to two days once materials arrive. We know the alleys off Chandler Boulevard, the shared driveways near Vineland Avenue, and the tighter setback lots south of Burbank Boulevard. If you need a gate that works in 105°F heat and doesn’t bind on a post that hasn’t been plumb since 1994, call (213) 577-1120 for a written price before anyone picks up a tool.
Why Vance Gate Repair Burbank Is North Hollywood’s Preferred Gate Installation Company
Our Gate Installation team does more than bolt hinges to posts in North Hollywood. We check what the ground did in 1994 before we set anything. Adrian Vance started this company in 2014 doing commercial access-control documentation, and that habit carried over: every install leaves with a photographed record of the post plumb readings, wiring terminations, and safety sensor positions. Homeowners in the 91601 and 91605 ZIP codes get the same paperwork a commercial facility manager would demand.
Response time to North Hollywood from our Los Angeles office runs same-day for quotes and most installs scheduled within the week. North Hollywood customers regularly tell us two things: the written price before work starts is why they called, and the photo log we leave behind is why they won’t call anyone else. No voicemail loop either. A live person answers 24 hours a day, which matters when a gate fails at 10 p.m. on Lankershim.
Our Gate Installation Services in North Hollywood
We install every type of Gate Installation in North Hollywood has needed since the 1980s retrofits: swing, slide, double, and pedestrian. The difference is how we set them for this specific valley. Here’s what that means in practice.
Driveway Gate Installation
Most North Hollywood driveway gates are tubular steel or wrought iron hung on posts poured 30-40 years ago. We set new posts, shim existing ones back to plumb, and weld or bolt the frame so the gate can survive the July expansion cycle without binding. If the driveway slopes even a few degrees, we factor that into the hinge placement before we drill.
Pedestrian Gate Installation
Pedestrian gates in North Hollywood get used more than the driveway gate, especially on the apartment-complex walkways radiating off Magnolia Boulevard. We install pedestal-post pedestrian gates with closers and mechanical keypads where the traffic demands it. If you need the gate to latch quietly and stay latched, the striker plate alignment gets photographed and filed in your job record.
Sliding Gate Installation
Sliding gates are the workhorse for North Hollywood’s narrower lots and shared driveways. Where a swing gate would sweep across a neighbor’s carport or block the sidewalk during opening, a slide gate runs parallel to the fence line and occupies almost no usable space. We install the track with proper drainage so standing water from the winter rains doesn’t pit the steel or freeze the rollers in place.
Swing Gate Installation
Swing gates in North Hollywood need their post bases set with the post-1994 ground shift in mind. A gate that swings clean in the morning can rub by 3 p.m. when thermal expansion takes up every millimeter of the original gap. We leave a heat-expansion margin by design, not by accident, and we document the final clearances so next year’s service call starts with real numbers.
Double Gate Installation
A double gate spans the widest driveway openings without the long tail of a single swing leaf. North Hollywood homes with a wide porte-cochere or a shared access easement off Vineland often need this configuration. We set both leaf posts to match height and plumb, align the center latch, and adjust the operators so the leaves close in sequence without slamming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We work on whatever motor is already on the property, and we install what fits the job rather than steering you toward one brand. That includes operators from Linear, Ghost Controls, DoorKing, Viking, and five other major automation lines we service. North Hollywood customers can order parts through us and get them installed without waiting for a generic handyman who has never touched a gate opener. Every part number goes on your written record.
Common Gate Installation Problems We See in North Hollywood Homes
- Thermal racking on slide gates. In summer, 105-110°F days expand the steel track and gate frame enough that a gate that slides at 9 a.m. binds by 3 p.m. We set installation clearances for the Valley heat, not coastal conditions.
- Post drift from the 1994 Northridge earthquake. The epicenter was roughly four miles west of North Hollywood, and lateral ground movement knocked thousands of gate posts a few degrees out of plumb across the Valley floor. A “mystery bind” is often a hinge post that hasn’t been vertical since January 17, 1994.
- Shared-driveway loop detector placement. On the 1960s apartment complexes and duplex lots in southern North Hollywood, a badly placed loop detector lets the gate close on a car parked halfway through the easement. We position the loop and set the dwell time for real traffic flow, not the spec sheet.
- Operators that weren’t sized for the gate. A swing operator sized for a 300 lb. gate struggles with the extra torque of a heavier 40-year-old iron frame. We measure the gate, not the brochure, before we install the motor.
Pricing for Gate Installation in North Hollywood, CA
Here’s what North Hollywood homeowners typically pay. A basic single-leaf swing gate with a manual closer runs $1,450-$2,600. A slide gate with an automated operator runs $2,800-$4,800, depending on the track length and whether we’re adding a loop detector. A double gate with dual operators runs $3,500-$6,200. A pedestrian gate with a keypad and electric strike runs $1,100-$2,400. Every job gets a written price covering the full scope, handed to you before we start. You approve the number first. That’s Clause 1 of the Haven Standard, not a courtesy.
We Also Serve Cities Near North Hollywood
Our Gate Installation team covers North Hollywood and the surrounding communities. We serve Studio City, Van Nuys, Sun Valley, and Burbank with the same written-price, documented-record standard. Same crew, same photo log, same guarantee.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Hollywood
It’s thermal expansion, not a mystery. North Hollywood’s summer heat, which runs 105-110°F in the worst weeks, expands the steel gate frame enough to close up the gap you had at installation. We leave clearances built for that. If your gate binds every afternoon, the original installer didn’t. Call (213) 577-1120 and we’ll measure the actual clearance, photograph the binding point, and show you the number before we adjust anything.
Yes, we do it in North Hollywood all the time. On a shared driveway off Vineland Avenue, we installed a slide gate for a 1960s apartment complex where a swing gate would have blocked the neighbor’s carport. We replaced a worn rack and pinion with a BFT slide operator, added a loop detector in the shared easement so the gate stays open for exiting cars, and set safety photocells low enough that the postman’s cart wouldn’t trip them but a child would. A slide gate is the correct answer for any North Hollywood shared driveway where a swing gate would sweep across someone else’s parking.
Generally, a gate that replaces an existing one or installs within your own property line rarely requires a permit in North Hollywood. The exception is when the gate is near a sidewalk and swings outward over public right-of-way, or when new electrical is run from the main panel. We check the property and tell you what’s needed before we schedule anything. If a permit is required, we handle the paperwork and don’t start work until it’s posted.
Very possibly, yes. The Northridge epicenter was roughly four miles west of North Hollywood, and the lateral movement shifted concrete gate-post footings across the Valley floor. Your gate can hang perfectly straight while the post it’s bolted to leans a few degrees off plumb. We check post plumb first on any new installation. If the post moved in 1994, no amount of gate adjusting fixes it. We re-set or shim the post, then hang the gate. Then we photograph the plumb reading and give you the record.
For swing gates, a belt or gear-driven swing arm handles North Hollywood’s heat better than a screw drive, which can bind when the thermal expansion shifts the mounting geometry. For slide gates, a chain or rack-and-pinion drive runs cooler and handles the longer travel better. We install operators from DoorKing, Viking, Ghost Controls, and Linear, and the choice depends on the weight and type of your gate, not on a brand preference. We’ll write you a specific recommendation with the model number and the price before anything is ordered. Call (213) 577-1120 for that written quote.
Contact Vance Gate Repair for Gate Installation in North Hollywood, CA
Call (213) 577-1120 for a free estimate and a written price on your North Hollywood gate installation. A live person answers around the clock. We’ll measure, quote in writing, install with the heat and post-drift factored in, and leave you a photographed record of what we did. Under the 365-Day Done Right Promise, if the gate isn’t right within a year, we make it right. No argument, no fee.
Written by Adrian Vance, Owner at Vance Gate Repair, serving North Hollywood since 2014.
Gate Installation in Nearby Areas
