Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pasadena, CA
Gate access control in Pasadena means keypads, phone entry, card readers, and video intercoms on properties where the gate itself is often older than the automation. Homes in Bungalow Heaven and Prospect Square carry wooden driveway gates from the 1920s and 1930s, and retrofitting modern entry hardware onto century-old posts without splitting them is the real job. Call (213) 577-1120 and we’ll name the hardware, the labor, and the written price before anything gets unbolted.
Why Pasadena Homes Are Different
Pasadena’s housing stock leans hard into Craftsman bungalows and Spanish Colonial Revival homes built between 1910 and 1935. The gates on these properties are not aluminum boxes from a catalog. They are wood-framed, often hung on ornamental wrought iron hinges set into brick or stucco columns. When automation gets added decades later, the motor usually out-powers the post, or the keypad gets surface-mounted onto wood that has already started to check from a century of heat cycling.
The inland basin heat matters. Pasadena regularly posts the highest summer temperatures in the county, and UV exposure dries out wood gates faster than anyone expects. Paint cracks, joints open, screws lose purchase. Then Santa Ana winds come down through the passes above Altadena each fall and hit gates with enough lateral force to shear hinge bolts or push a misaligned opener sensor out of range. We see a predictable spike in stress-failure calls every October and November.
Historic district rules add one more layer. Bungalow Heaven and other landmark areas answer to Pasadena’s Design and Historic Preservation staff, who can reject a modern replacement gate outright if it breaks architectural character. That pushes repair work, not replacement, and it demands joinery skill and period-matching hardware sourcing that a generic gate outfit never develops.
Our Main Pasadena Services
Two services carry most of our Pasadena work: gate repair and gate installation. Homeowners call us for both, usually after a gate stops closing or a post lets go.
Gate Repair in Pasadena
A sagging gate, a hinge pulled from a brick column, a latch that no longer catches, a welded joint cracked through. Pasadena’s older wood gates fail in predictable ways, and repair here often means reshaping a wood rail, resetting a hinge in epoxy, or re-welding a wrought-iron picket that snapped at the scroll. We bring the price in writing before we touch the gate. See the full scope on our Gate Repair in Pasadena page.
Gate Installation in Pasadena
New construction, a full replacement after storm damage, or an upgrade from a manual gate to an automated one. Installations on Pasadena’s older lots often mean working around existing brick columns, adjusting for a driveway that slopes down toward the Arroyo, and in landmark districts, matching a period style. We quote the design, materials, hardware, and labor as one written number before ordering anything. Details are on the Gate Installation in Pasadena page.
Gate Motor & Opener in Pasadena
Motors burn out, control boards fail, and the Santa Ana season finds every weak arm bracket in the San Gabriel Valley. Pasadena’s heat also ages capacitor and limit-switch components faster than coastal locations. When a motor needs replacement, we match the new opener to the gate’s actual weight and travel, not just the old model number. Read specifics on the Gate Motor & Opener in Pasadena page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Pasadena
Gate access control in Pasadena covers keypads, card readers, phone-entry boxes, and video intercoms mounted on gates and posts that were built before this hardware existed. A BFAST or FAAC keypad bolted to a 1920s wooden post is a different job than the same keypad on steel tube: the wire run has to go through brick or stucco, the mounting surface often needs reinforcing, and the solar heat in this basin means we use sealed connectors wherever possible. For a complete breakdown of hardware options, see our Gate Access Control hub.
Keypad Entry
Signs you need it
A gate that can only be opened with a remote, or a keypad with buttons that have gone dead from sun exposure and no longer register codes.
What it costs in Pasadena
Keypad entry in Pasadena typically runs $150 to $500, depending on whether it is a standalone unit or tied into an existing opener control board.
How we do it
We test voltage at the post, run new low-voltage wire if the old run is cracked, mount the keypad on a reinforced plate, and program codes with a written record of the settings.
Phone Entry
Signs you need it
A gate that should be openable from a call box, or an existing phone-entry unit that dials but never rings through to your cell.
What it costs in Pasadena
Phone-entry systems in Pasadena run $400 to $1,200 installed, with the higher end covering cellular units that do not need a wired phone line.
How we do it
We mount the call box, route power and phone or cellular service, program the directory numbers, and test the call path before we leave.
What Gate Access Control Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Keypad entry | $150 - $500 |
| Phone entry | $400 - $1,200 |
| Card reader | $300 - $800 |
Can you add a keypad to a wood gate without damaging it?
Yes. We use a backing plate or a post-mounted bollard when the wood itself cannot take anchors. The wiring is run through sealed conduit, never surface-stapled, and every penetration gets a photo record before the keypad goes up.
Does a Pasadena historic district review access-control hardware?
Sometimes. Keypads and intercom boxes attached to gates or posts in a landmark district can trigger design review if they are visible from the street. We position hardware on the inward face where possible and use dark or bronze finishes that read as period-appropriate.
Gate Parts & Welding in Pasadena
Pasadena’s older gates depend on parts and welding more than any other repair category. A hinge needing replacement on a 1930s wrought-iron gate, a rotted post inside a stucco column, a cracked rail that has to be welded in place rather than swapped. The city’s landmark districts push us toward restoration, and restoration is fastening, cutting, and welding. Parts sourcing and metalwork specifics live on our Gate Parts & Welding hub.
Hinge Replacement
Signs you need it
A gate that drags on the latch side, a hinge pin that has worn oval, or a top hinge pulling out of a brick column.
What it costs in Pasadena
Hinge replacement in Pasadena runs $100 to $300 per hinge, including removal of the old fasteners and the new hardware.
How we do it
We lift the gate onto stands, cut the old fasteners free, re-drill and epoxy new anchors into the masonry, and re-hang the gate with the swing adjusted.
Post Replacement
Signs you need it
A gate post that visibly leans, rotates when the gate moves, or shows deep cracks at the base from years of heat and Santa Ana loading.
What it costs in Pasadena
Post replacement in Pasadena runs $400 to $1,000 per post, depending on whether it is set in concrete, stucco, or brick.
How we do it
We saw the old post at ground level, break out the concrete footing, set a pressure-treated or steel post to depth, and re-hang the gate after the footing cures.
What Gate Parts & Welding Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Hinge replacement | $100 - $300 per hinge |
| Post replacement | $400 - $1,000 per post |
| Custom welding | $150 - $600 per repair |
Can you weld a cracked wrought-iron gate without removing it?
Often, yes. We weld in place when the crack is accessible and the gate can be braced. The weld gets ground, primed, and painted. If the crack runs through a scroll or a critical joint, we may recommend removal for a full bench weld.
Do you source period-appropriate hardware for Bungalow Heaven gates?
Yes. We maintain sources for strap hinges, pintles, and latch hardware in period finishes. We will also match an existing hinge by taking measurements and a photo before ordering, so the replacement does not look new against a 90-year-old gate.
Brands We Service in Pasadena
We service FAAC, BFT, Linear, and Viking automation among the nine brands we support. Parts for these are stocked at our Los Angeles dispatch office and brought to Pasadena the same day the job is scheduled. See the full list on our brands page.
Pricing for Gate Repair in Pasadena, CA
| Service | Typical range in Pasadena |
|---|---|
| Keypad entry | $150 - $500 |
| Phone entry | $400 - $1,200 |
| Card reader | $300 - $800 |
| Video intercom | $500 - $1,500 |
| Hinge replacement | $100 - $300 per hinge |
| Post replacement | $400 - $1,000 per post |
| Rail repair | $150 - $500 |
| Custom welding | $150 - $600 per repair |
| Gate rollers | $80 - $250 per roller |
Prices in Pasadena push toward the higher end of these ranges when the work involves landmark-district hardware matching, masonry drilling into old brick, or a gate that has to be braced in place while the parts go in. Whatever the number, it is written down and handed to you before any work starts. You approve the price, then we pick up tools.
Neighborhoods We Serve in Pasadena
We work across Pasadena, from the flat streets of Bungalow Heaven to the sloped lots up in Linda Vista and the estate gates along Oak Knoll. Response time for most Pasadena calls is same-day when the job is a repair, and we schedule parts and installation work within the week.
- Bungalow Heaven
- Prospect Square
- Arroyo Seco corridor
- Linda Vista
- Oak Knoll
Service Area - Cities Near Pasadena
We also serve Burbank, CA, Tujunga, CA, North Hollywood, CA, and Los Angeles, CA. The same written-price rule applies everywhere we work, and the same photo-record documentation goes home with every customer.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pasadena
Same-day response is typical for repair calls in Pasadena. A technician is dispatched from our Los Angeles office with the common parts already on the truck, so most hinge, sensor, and latch repairs are completed in a single visit. Call (213) 577-1120 to get a technician routed to your address.
Repairs that do not change the gate’s size, height, or location generally do not need a permit. If you are in a historic district like Bungalow Heaven, design review may apply when visible materials or hardware change. We can tell you which category your job falls into before any work starts.
Yes. Pasadena HOAs often require written approval before exterior gate changes. We provide the written scope, material list, and photo documentation most HOA boards ask for, and we price the job in writing so you can submit a complete package on the first pass.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.