Lock Repair in Burbank, CA

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Lock Repair in Burbank, CA

Lock repair for residential and commercial gates in Burbank typically ranges from $150 to $350, depending on whether the issue stems from a faulty solenoid, a misaligned latch, or a damaged electronic strike plate. At Vance Gate Repair, we provide a written price estimate before we pick up a single tool, ensuring you know the exact cost of the gate repair before work begins. If your gate is failing to latch or the lock is jammed, call us at (213) 577-1120 to schedule a technician. We serve the entire Burbank area, from the homes near the Media District to the properties surrounding the Verdugo Mountains.

A gate lock is not just a piece of hardware; it is the first line of security for your property. When a lock fails, it often points to a larger issue with the gate’s alignment, the motor’s limit switches, or the control board’s output. We do not just replace the lock and leave. We follow the Haven Standard, which means we diagnose the root cause, provide a written scope of work, and leave you with a documented photo record of exactly what we adjusted or replaced. This ensures you are not paying to fix the same problem twice. For comprehensive services, you can also view our main Gate Repair in Burbank page.

When You Need Lock Repair

Gate locks in Burbank often struggle due to the specific climate. We see many issues caused by the rapid expansion and contraction of metal gates during our hot, dry summers. When the gate frame expands, the lock receiver often becomes misaligned, putting unnecessary stress on the solenoid or the motor’s locking arm. If you notice any of the following, the locking mechanism likely requires professional weld & rust repair or adjustment:

• The gate closes but fails to latch, leaving the property unsecured.
• You hear the solenoid clicking repeatedly, but the pin does not engage or retract.
• The gate is physically dragging against the ground, causing the latch to strike the receiver at the wrong height.
• The electronic keypad or remote control triggers the motor, but the lock remains engaged, preventing the gate from opening.
• There is visible rust or corrosion on the strike plate or the lock housing, often seen on older gates near the Burbank foothills.
• The gate motor is forcing the gate against the stop, which can snap the lock or bend the mounting bracket.

If you encounter these issues, do not force the gate. Forcing a stuck lock can strip the gears in your gate motor, turning a simple lock adjustment into a expensive motor repair. Our technicians are trained to assess the entire system, ensuring that when we fix the lock, we also verify that the gate motor is not causing the mechanical stress that broke the lock in the first place. You can learn more about our general service approach on our home page.

Our Lock Repair Process

We operate under the Haven Standard, which prioritizes documentation and transparency. When we arrive at your Burbank property, we follow a consistent procedure to ensure the job is done right the first time. We service major automation brands, including FAAC, BFT, Linear, and Viking.

1. System Inspection: We start by testing the gate cycle to see where the latch makes contact with the receiver. We check the gate’s hinges for sag, as a sagging gate is the most common cause of lock failure.
2. Diagnosis and Written Quote: Before we touch the hardware, we provide a written price. This covers the parts and the labor. You approve the price, and then we begin.
3. Adjustment or Replacement: If the lock is repairable, we adjust the latch, realign the receiver, or tighten the solenoid mount. If the lock is broken, we replace it with a compatible unit matched to your motor’s voltage and amperage requirements.
4. Testing and Calibration: We cycle the gate multiple times to ensure the lock engages and disengages smoothly without binding. We also verify the limit switches to ensure the motor stops at the exact position required for the lock to function.
5. Documentation: Under Clause 4 of the Haven Standard, we create a photo record of the repair. We photograph the alignment, the new parts installed, and the final state of the gate. We leave this record with you so you have a history of the work performed on your gate.

Before

After

Lock Repair Pricing in Burbank

We believe in upfront pricing. We do not use “call for a quote” tactics. The price we provide is the price you pay, with no surprise fees on the final invoice. Below are typical ranges for common lock repair scenarios in Burbank.

• Lock Adjustment and Realignment: $150 - $220. This is common when the gate has shifted due to ground movement or hinge wear.
• Solenoid Replacement: $250 - $380. This includes testing the electrical output from the control board to ensure the new solenoid receives the correct voltage.
• Strike Plate or Receiver Fabrication: $200 - $350. Sometimes the original mounting point is rusted or stripped, requiring us to weld a new bracket or reinforce the existing mount.
• Electronic Lock/Maglock Repair: $300 - $500+. Maglocks require specific alignment and power supply testing. Prices vary based on the brand and the complexity of the wiring.

If you have a written estimate from another company, we offer a free second opinion. Bring the paperwork to us, and we will review the scope of work at no cost to you. Call (213) 577-1120 for an exact quote on your repair.

FAQs - Lock Repair

How much does it cost to fix a gate lock in Burbank?

Most gate lock repairs in Burbank cost between $150 and $380, depending on whether the issue requires a simple alignment or a component replacement like a solenoid or strike plate. We provide a written price before any work begins, so you know exactly what you are paying for before we start. Call (213) 577-1120 for an exact estimate for your specific gate.

Is it cheaper to repair or replace the lock?

In most cases, it is cheaper to repair or adjust the existing lock, especially if the issue is alignment-based. We only recommend replacement if the solenoid is burnt out or the metal housing is structurally compromised. Because we service major brands like FAAC, BFT, Linear, and Viking, we can often source replacement parts that fit your existing automatic gate repair system without requiring a full gate overhaul.

Can you fix my gate lock today?

Yes, we offer same-day service for urgent gate issues in Burbank. Because we carry a wide range of common parts on our service trucks, we can often complete the repair in a single visit. Call us at (213) 577-1120, and a live person will assist you in scheduling a technician to your Burbank home.

Why does my gate lock keep failing?

Repeated lock failure is almost always a symptom of a secondary issue, such as worn hinges, a sagging gate frame, or incorrect limit switch settings on the motor. If the lock is not hitting the receiver perfectly every time, it will eventually break or jam. Our technicians identify the root cause-not just the symptom-to ensure the repair lasts.

If your gate is not securing your property, we are ready to help. We bring the tools, the parts, and the documentation habit required to get your gate working again. Every job is backed by our 365-Day Done Right Promise. Call (213) 577-1120 to speak with us about your electric gate repair needs.

Written by Adrian Vance, Owner at Vance Gate Repair Burbank, serving Burbank.