Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Burbank?
Our Gate Installation services in Burbank, CA typically cost between $3,200 and $8,500, depending on the material, automation brand, and site-specific welding requirements. For a standard single-swing driveway gate, homeowners usually pay around $4,200, while custom dual-swing or sliding gates with heavy-duty motors often range from $6,500 to $12,000. Adrian Vance and the team at Vance Gate Repair provide a written, upfront price for every installation before we begin, ensuring you know the exact cost before work starts.
Whether you’re in a neighborhood like the Burbank Hills where slope-sensitive swing gates are common, or down in the flatlands of the Media District where sliding gates are the standard for space-saving, the cost varies based on the mechanical complexity. Because we follow The Haven Standard, we don’t do “ballpark” numbers over the phone. We come to your property, assess the gate structure and the motor requirements-whether it’s a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule-and provide a firm written quote. If you’re ready to get a clear, documented price for your project, give us a call at (213) 577-1120.
Gate Installation Cost Breakdown (2026)
Understanding the cost of a new gate requires looking at the individual components that make up the total. In Burbank, labor and materials are the primary drivers of the final invoice. Under Clause 1 of The Haven Standard, we provide a detailed, written scope for every job so you aren’t guessing where your money is going.
| Component | Estimated Cost Range |
|---|---|
| Standard Swing Gate (Materials & Installation) | $3,200 - $5,500 |
| Sliding Gate System (Track, Motor, Fabrication) | $5,000 - $9,500 |
| Gate Automation Motor (Installed) | $1,800 - $3,600 |
| Access Control (Keypads, Remotes, Intercoms) | $450 - $1,200 |
| Custom Welding & Fabrication (Per Hour/Custom Add-on) | $150 - $300 |
The numbers above reflect the current market for residential gate installation in Burbank. These costs assume a standard site setup. Factors that drive the price toward the higher end of the spectrum include the need for extensive concrete work to secure a sliding gate track, the requirement for high-security access controls like cellular-based intercoms, or the choice of heavy-gauge steel or wrought iron materials that require specialized welding. Every installation we perform includes our documented photo record (Clause 4), so you have a permanent file of exactly how your gate was mounted and wired.
What Affects Gate Installation Pricing in Burbank
When we arrive at a property in Burbank to provide an estimate, we aren’t just looking at the gate itself. We are looking at the site conditions, the power source, and the physical limitations of the driveway. These five factors are the most common variables that change the final price of an installation.
- Grade and Slope: Many properties in the Burbank Hills have driveways with a noticeable incline. A gate installed on a slope requires specialized hinges or a custom-fabricated rack-and-pinion setup to ensure the gate clears the ground when it swings. This adds labor and material costs compared to a flat, level driveway.
- Power Accessibility: If your driveway gate is located 50 feet or more from your main electrical panel, we have to trench and run conduit to bring power to the motor. The distance and the difficulty of the terrain-whether we are digging through dirt, concrete, or asphalt-directly impact the labor hours required.
- Gate Material and Weight: A lightweight aluminum gate is easier to mount and requires less powerful motors, keeping costs lower. Conversely, heavy-duty wrought iron or wood-clad steel gates require stronger hinges, reinforced mounting posts, and higher-torque motors to operate safely without premature wear.
- Automation Brand and Features: We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Some systems offer more advanced features like battery backups, solar capabilities, or advanced smartphone integration. Choosing a system with these features will increase the initial investment.
- Safety Requirements: By code, every gate must have safety devices like photo-eyes (the infrared beam that stops the gate if something crosses the path). If your installation requires multiple safety zones or specialized sensors to comply with local codes, these components add to the total cost, but they are non-negotiable for safety.
Safety is not a luxury; it is a requirement. High-tension springs, heavy gate panels, and high-voltage electrical components can be dangerous if handled incorrectly. We strongly recommend that you have a trained professional handle the installation rather than attempting a DIY approach. If you have questions about the safety features required for your specific property, give us a call at (213) 577-1120.
BeforeAfterHow to Save on Gate Installation
Saving money on a gate installation isn’t about choosing the cheapest materials, which often leads to more frequent repairs. It’s about choosing the right system for your needs and avoiding “feature creep.”
First, be clear about your primary goal. Do you need a security gate that acts as a physical barrier, or are you looking for a convenience feature? If you only need a basic Pedestrian Gate or similar entry, opting for a standard manual swing gate with the option to add automation later can save you money upfront. However, if you know you want automation, installing the wiring conduit during the initial build is significantly cheaper than tearing up your driveway to add it two years later.
Second, consider the brand. We work with nine different manufacturers because every property has different needs. You don’t always need the most expensive commercial-grade motor for a light, residential-use driveway. We can help you select a motor that fits your usage pattern-whether you open the gate twice a day or twenty times a day-so you aren’t paying for power you don’t use.
Third, take advantage of our free second opinion. If you have a written estimate from another company and you aren’t sure if the price is fair or if the scope is correct, bring the paperwork to us. We will review it at no cost. Under our 365-Day Done Right Promise, we stand by our work, and we want you to feel confident that the price you are paying is for the right solution, not just the easiest one.
If you need assistance with your home gate system, call (213) 577-1120. We answer the phone 24/7, and we are ready to help you plan your installation.
FAQs - Gate Installation Cost
How much does it cost to add a gate motor to an existing gate in Burbank?
Adding a motor to an existing gate typically costs between $1,800 and $3,500, including the motor unit, safety sensors, and the necessary electrical work. This price varies based on whether your gate is currently balanced properly and if we need to reinforce the mounting points to support the motor’s force. Call (213) 577-1120 for an exact quote.
Is it cheaper to repair a gate or replace it entirely?
In many cases, repair is significantly cheaper, often costing between $300 and $900 for common issues like limit switch adjustments, sensor alignment, or hinge welding. We only recommend replacement if the gate frame is structurally compromised (e.g., rusted through or bent beyond repair) or if the motor is obsolete and parts are no longer available. We provide a written assessment of whether repair or replacement makes more sense for your specific situation.
Can you install a gate on a sloped driveway in Burbank?
Yes, we install gates on sloped driveways regularly. This typically requires custom-hinge fabrication or a specific swing direction to ensure the gate doesn’t drag on the pavement. The cost is generally 15% to 25% higher than a flat-driveway installation due to the specialized welding and engineering required to make it function smoothly. Call (213) 577-1120 to schedule an on-site assessment.
How long does a professional gate installation take?
A standard gate installation usually takes two to three days. The first day is typically for site preparation, post setting, or track installation. The second day involves hanging the gate, mounting the motor, and wiring the access controls. We ensure all work is documented, and we test the gate under load before we consider the job complete.
Do you provide a warranty on gate installations?
Yes, every gate installation we perform is covered by our 365-Day Done Right Promise. If the repair or installation is not right, we make it right-no argument, no fee, and no expiration date within that one-year window. We also provide a documented photo record of every adjustment we make, so you have a permanent history of your gate’s installation.
Pricing reflects the Burbank market as of 2026. Vance Gate Repair Burbank offers free estimates - call (213) 577-1120.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Burbank since 2014.
What Our Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.