Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tujunga
Gate installation in Tujunga runs $2,800 to $9,400 for a typical driveway gate, depending on material, span, and whether you need a new opener. That’s the honest range we quote before any work starts, in writing. Tujunga poses a set of conditions most Valley gate companies never plan for: Santa Ana winds that funnel down Big Tujunga Canyon at 50-plus mph, sloped foothill driveways where swing gates won’t clear the grade, and VHFHSZ fire-code rules that can prohibit combustible materials outright. We’ve worked these streets long enough to know the difference between a gate that looks fine and one that’s one wind event away from failure. Call (213) 577-1120 for a free estimate, written and handed to you before we pick up a tool.
Why Vance Gate Repair Burbank Is Tujunga’s Preferred Gate Installation Company
We’re the company Tujunga homeowners call after a cheaper install fails. That’s not marketing language; it’s the pattern we see weekly. A gate hung on the wrong post depth, an opener undersized for the wind load, a wood panel that checks and splits within two dry seasons. We fix those. Then we install the right configuration the first time, with a documented photo record of every footing, bracket, and limit-switch setting we touched.
Our team works from the Los Angeles office, but the technicians who show up at your Tujunga property know this terrain. They know the streets off Foothill Boulevard where driveways slope at 8 to 12 degrees. They know the upper canyon roads near the Angeles National Forest boundary where fire-code inspectors enforce non-combustible materials. They know the difference between a gate post that’s rocking from wind fatigue and one that’s simply settled. That local knowledge means the estimate we write reflects what Tujunga actually requires, not a template built for Burbank or North Hollywood.
Adrian Vance started this company in 2014 in commercial access-control work, and that habit of documentation carried over. Every residential gate installation leaves behind a photo log: the footing before concrete, the post at plumb, the final wiring diagram. You don’t have to trust a handshake. You get the evidence.
Our Gate Installation Services in Tujunga
Sliding Gate Installation
On Tujunga driveways with real slope, a swing gate is often the wrong answer. The panel has to clear the uphill grade as it opens, and when it doesn’t, you get a gate that jams halfway through its arc. Sliding gates ride on a track parallel to the driveway line, so the slope affects the install but not the daily operation. We pour the rail footing deep enough for wind load, set the steel or aluminum panel on sealed bearings, and pair it with an opener sized for the gate’s actual weight and span. Most sliding gate installs in Tujunga run $3,500 to $8,000 depending on panel width and whether we’re running mains power or solar.
Driveway Gate Installation
The typical Tujunga driveway gate spans 12 to 16 feet across an entrance cut into a hillside lot. That’s wider than standard suburban gates, which means the wind load isn’t just about surface area; it’s about the lever arm working on the post. We set posts in concrete footings 3 feet deep minimum, often deeper on properties where the soil has eroded from years of canyon runoff. The panel itself gets mounted with wind-rated hinges and a positive stop so it can’t over-travel in a gust. Driveway gate installation with a new opener in Tujunga typically runs $4,200 to $9,400.
Security Gate Installation
Security gates around Tujunga do double duty: they slow down the curious and they hold up to wind that would tear apart a decorative panel. We install steel security gates with reinforced bracing, picket spacing that meets local code, and magnetic locks or heavy-duty openers with battery backup so the gate still functions during a public-safety power shutoff. On properties near the forest boundary, we also coordinate with fire-code requirements so your gate doesn’t create an access problem for emergency vehicles. Security gate installs in Tujunga generally start around $3,800 and go up based on height, gate width, and access-control hardware.
Pedestrian Gate Installation
Pedestrian gates get less attention than driveway gates, but they get more use. Every delivery, every visitor, every kid walking to school passes through that narrow opening. In Tujunga, the most common problem is a pedestrian gate hung on a shared post with a heavy driveway panel. The post flexes, the latch misalignes, the gate drags. We install standalone pedestrian gates with independent posts and proper hinge alignment so the daily-use opening stays square. A typical pedestrian gate install runs $800 to $1,800, depending on material and whether we’re running a keypad or intercom.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Tujunga
We work across nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Your gate doesn’t need to match our preferred brand. We’ll work with whatever opener is already on the property, or help you select the right one for a new install. For Tujunga specifically, we commonly recommend Linear and DoorKing operators for their wind-load handling and reliable battery-backup options, and Ghost Controls for solar-powered rural entrances where running mains power isn’t practical. We keep local parts stock for all these brands, so a replacement board or limit switch doesn’t mean waiting a week for a shipment.
Common Gate Installation Problems We See in Tujunga Homes
- Undersized posts for the wind load. The canyon funnels Santa Ana gusts directly onto the gate face. A post set in a 2-foot footing with a 6-inch diameter will lean within two seasons. We set 4×4 or 6×6 steel posts in 3-foot concrete footings on every install, deeper where the soil is loose.
- Swing gates that fail to clear sloped driveways. We’ve measured driveways on streets off Apperson and Foothill with 10 percent grades or more. An inward-swinging gate physically cannot open uphill. This is the most common reason a Tujunga homeowner replaces a swing gate with a sliding configuration.
- Wood panels that check and split in the dry season. Summer and fall relative humidity in the canyon can drop into single digits. Untreated wood gives up its moisture fast. Cedar and redwood both crack here. We specify steel, aluminum, or properly sealed engineered wood when a Tujunga customer wants a wood look.
- Openers that throw alignment after a wind event. A 55-mph gust pushes the gate panel hard against the opener arm. The result is a stripped limit switch, a bent arm bracket, or a motor that trips its thermal overload trying to overcome the pressure. We set openers with the gate’s true weight and wind exposure in mind, not the panel’s rated weight alone.
Pricing for Gate Installation in Tujunga, CA
A basic single-panel driveway gate install with a new opener starts around $2,800. A wider steel sliding gate with access control, battery backup, and solar or mains power can reach $9,400. Pedestrian gates run $800 to $1,800. The main cost drivers in Tujunga are the gate span (you’re often covering a wider entrance than a Valley suburb), the footing depth required for wind stability, and whether fire-zone material rules eliminate wood as an option. We write the price before work starts, on paper. Not a verbal range. Not a handshake. A written scope with a dollar figure attached to each line item, handed to you at the estimate visit. That’s Haven Standard Clause 1, and it applies to every job we quote in Tujunga.
We Also Serve Cities Near Tujunga
Our Gate Installation crews cover the surrounding foothill and Valley communities as well: Burbank, Sun Valley, North Hollywood, and San Fernando. If you’re in one of those areas, the same written-price standard and documented photo record applies. But if you’re in Tujunga, you get a crew that knows this canyon’s wind and fire code better than anyone who treats it as just another stop on a Valley route.
Serving Tujunga, CA - Our Local Coverage Area
We’re based in the Tujunga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tujunga
If your driveway slopes more than about 5 degrees, yes, a sliding gate is almost always the right choice. Swing gates must clear the uphill grade as they open, and on many Tujunga hillside lots that’s physically impossible. We’ll measure the grade during the estimate and tell you straight: if the slope won’t allow a reliable swing, we’ll quote a slide configuration that works with the terrain rather than against it.
Maybe not. Properties in the VHFHSZ, especially on upper streets near the Angeles National Forest boundary, fall under fire-code provisions that can prohibit combustible gate materials. If your lot is in that zone, a wood replacement may be disallowed and we’ll need to specify steel or aluminum. We’ll check the parcel’s fire-zone status before quoting any wood work, so you don’t pay for a design that code enforcement won’t approve. Call (213) 577-1120 and we’ll verify it on the spot.
Wind gusts over 50 mph push against the gate panel and transfer that force directly into the opener arm, stripping limit switches, bending brackets, and tripping motor overloads. The fix is an opener sized for the gate’s real weight and wind exposure, plus a positive stop that prevents over-travel. We also set wind-load parameters in the opener’s programming so it doesn’t fight a gust it can’t win.
Yes, and we’ve installed many on rural and acreage entrances where running conduit from the house isn’t practical. A properly sized solar panel, charge controller, and deep-cycle battery will run a gate opener through normal daily cycles, even during winter’s shorter sun. Ghost Controls and Linear both build solar-capable units we trust. The key is sizing the panel to the gate’s cycle count and your local sun exposure, which we calculate during the estimate. Call (213) 577-1120 to discuss your entrance’s specific power needs.
Wind fatigue and shallow footings. The original post was likely set 18 to 24 inches deep, which was probably fine when the house was built, but a 16-foot gate panel acting as a lever in sustained 50-mph gusts will crack concrete at the base within a few seasons. The crack you’re seeing is the footing failing, not the post. We replace the post and pour a new footing at least 3 feet deep, sometimes deeper on loose soil, and we photograph the old footing before the pour so you can see what was actually holding your gate up. Call (213) 577-1120 for an exact quote, written and free.
Written by Adrian Vance, Owner at Vance Gate Repair Burbank, serving Tujunga and the surrounding foothill communities.
Ready for a written price on your Tujunga gate installation? Call (213) 577-1120 for a free estimate. A live person answers, day or night.