Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burbank
Gate installation in Burbank typically runs $2,800-$9,500 depending on whether you need a single swing gate, a sliding gate on a track, or a full commercial-duty gate near a studio corridor. Most residential installs take one to two days once materials arrive. We serve every neighborhood in Burbank, from the flats near Verdugo Park up into the Burbank Hills, and we quote a written price before any work begins. Call (213) 577-1120 to schedule a free measure and get your price in writing.
Our Gate Installation team has worked on older ranch homes, hillside properties, and studio-adjacent buildings across Burbank. What we see again and again is this: gates that were hung decades ago without proper footings, operators that predate modern safety standards, and hardware that was never sized for heat or wind conditions that are specific to this valley-mouth location. We tell you honestly what can be retrofitted and when replacing a post or an operator is actually the cheaper long-term answer.
Why Vance Gate Repair Is Burbank’s Preferred Gate Installation Company
Burbank homeowners tend to research before they call. They want the price visible, the scope written down, and a record of what was done. That’s how we work. Founded by Adrian Vance in 2014 out of commercial access-control work, Vance Gate Repair operates under The Haven Standard: a written scope, a written price, and photographic evidence on every visit. Before we leave, you get a photo log of every adjustment and a written record of every part number installed.
We dispatch background-checked, uniformed technicians to Burbank daily from our Los Angeles office. You’ll know the technician’s name and see their photo before they arrive. And the 365-Day Done Right Promise means if something isn’t right within a full year, we make it right at no additional charge. That promise is in writing, not just spoken.
Burbank is different from neighboring cities in one important way: the studio corridors. Along the Warner Bros. perimeter on Olive Avenue and the Disney campus on Buena Vista Street, gate installers must coordinate with studio security for pre-approved vendor credentials. Operators on those lots run thousands of cycles per week. Residential hardware fails there quickly. We know the difference because we work both sides of it every month.
Our Gate Installation Services in Burbank
Swing Gate Installation
Swing gates remain the most common install in Burbank, especially across the ranch-style homes built between the 1940s and 1970s. But those original installations rarely included engineered footings. We regularly find posts set in a bag of Quikrete with no rebar, rotated toward the street after years of dry-wet soil cycles. A new swing gate on a properly poured 30-inch footing with #4 rebar solves the root problem instead of just re-hanging hardware on a moving post.
Sliding Gate Installation
Sliding gates make sense on Burbank lots where a swing arc would block a car in the driveway or where the driveway slopes toward the street. But slide gates need a level track bed and proper bottom rollers. In Burbank’s thermal pocket, steel tracks expand noticeably during 100°F-plus summer afternoons. We size the track gap accordingly and use heavier roller assemblies than a standard spec sheet would call for.
Security Gate Installation
Security gates in Burbank often need to do two jobs at once: keep a residential driveway private while handling more cycles than a typical home gate sees. That’s especially true for entertainment-industry professionals who work from home, have frequent deliveries, or run a home studio. We pair security gates with loop detectors sized for actual traffic patterns, and we document the full install photographically so any future service call starts from a record instead of a guess.
Pedestrian Gate Installation
Pedestrian gates flanking a driveway or closing a side yard are common across the Burbank flats. These smaller gates often get overlooked during a driveway project, but a pedestrian gate on its own post with a matching finish keeps the property line secure and the sight line clean. We install pedestrian gates with self-closing hinges and options for keypad or keyed access.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterCommon Gate Installation Problems We See in Burbank Homes
- Rotated hinge posts from settling footings. The Burbank flats have expansive clay soil that expands in winter and contracts in summer. Posts set without engineered footings rotate slowly, and the gate starts dragging on the latch side within a few years. We cut the old post, pour a new footing, and re-hang the gate level.
- Undersized operators on hillside installs. Properties in the Burbank Hills near the Verdugo foothills fight gravity on every swing. A standard residential operator stalls on the uphill arc, especially during Santa Ana winds. We size hillside operators by gate weight, gate length, and measured slope, not by the cheapest motor that fits.
- Studio-adjacent gates closing on cars. On Olive Avenue and Buena Vista Street, an older residential loop detector can’t keep up with high-cycle traffic. We install loop detectors sized for studio-type volume so the gate doesn’t close on a vehicle that’s still in the path.
- Santa Ana wind damage to wooden pickets. Fall winds funnel through the valley-mouth location where Burbank sits, regularly snapping wooden gate pickets. We recommend steel or aluminum picket frames for exposed gates, or thicker stock with reinforced cross-bracing if wood is the aesthetic requirement.
Trusted Brands We Service in Burbank
We work on whatever motor is already on your property. Our technicians are trained across nine major gate-automation brands, including FAAC, Linear, and Viking, plus LiftMaster, BFT, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common replacement parts locally for Burbank customers, which means less waiting when a control board fails or a drive chain wears out. We will never steer you toward replacing a motor when a repair is the right call. If you like the operator you have, we keep it running.
Pricing for Gate Installation in Burbank, CA
Here are direct dollar ranges for Burbank’s market, not vague national averages. A single swing gate with operator typically runs $2,800-$4,800, depending on gate width and whether we’re pouring a new footing. A sliding gate, including track, rollers, and operator, runs $4,500-$8,000 for a typical residential driveway width. A commercial-duty slide gate on a studio-adjacent property runs $7,500-$9,500 and up, sized for high-cycle use with a more robust drive assembly. A pedestrian gate runs $900-$2,200 installed. If an existing post is solid and the gate itself failed, you may only need a panel replacement at $1,200-$2,800. We write the exact number down and hand it to you before any work starts. That’s Haven Standard Clause 1, and it applies to every single job.
We Also Serve Cities Near Burbank
We also serve gate installation customers in North Hollywood, Sun Valley, Tujunga, and Studio City. If you’re a few minutes outside Burbank, the same written-price policy and local technician response applies. Call (213) 577-1120 and we’ll get you on the schedule.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Burbank
If the post is still plumb and the gate sags at the hinge, the panel or the hinge hardware is usually the problem. But in Burbank flats with original 1960s footings, the post is often rotated even if it looks straight from the street. We replaced a swing gate on a ranch near Verdugo Park where the original post footing was a bag of Quikrete in a hand-dug hole. The hinge post had rotated eight degrees toward the street. We cut the old post, poured a 30-inch engineered footing with #4 rebar, and hung a new LiftMaster LA400 operator with fresh safety photocells. Now the gate closes without grinding and the operator doesn’t trip its force limiter. Short answer: we need to put a level on the post before anyone tells you panel or post. Our assessment is free. Call (213) 577-1120.
Yes, but it requires correctly sizing the operator for the measured slope, not just the gate weight. Hillside installs near the Verdugo foothills frequently get undersized residential operators that stall on the uphill swing and trip their thermal limit during Santa Ana wind events. We measure the slope, calculate the actual torque the operator must deliver on the upward arc, and install either a heavier-duty residential operator or a commercial-grade unit depending on the numbers. Call (213) 577-1120 and we’ll come measure your slope and gate, then put a written price in your hand.
Solar works in Burbank, but the heat degrades lead-acid batteries faster than coastal installs. A solar operator in full sun during Burbank’s 100°F-plus summer weeks will shorten battery life meaningfully. If you have a short, occasional use pattern and a south-facing panel, solar can work. If the gate cycles more than a few times a day, 120V is the more reliable answer, and running conduit to the post is straightforward on most Burbank lots. We’ll give you both options in writing with real numbers for your specific site. Call (213) 577-1120.
Often just the loop. Viking operators from the 1990s and early 2000s are generally rebuildable, and a failed loop detector is a common failure point we see on studio-adjacent properties where traffic cycles run into the thousands per week. We test the operator itself first. If the motor, control board, and limit switches are sound, we replace the loop detector with a unit sized for actual traffic volume and leave your Viking in service. Call (213) 577-1120 and tell us what the gate is doing. We’ll tell you whether it’s a loop, a board, or a motor.
Yes. The fix is usually a steel or aluminum picket frame with a wood-look finish if you want the same aesthetic, or reinforced wood with cross-bracing and steel corner gussets. Burbank’s valley-mouth location means fall Santa Ana winds hit harder here than in West LA or Pasadena. We install gates designed for that specific wind load, and we show you the wind-rating math in the written spec. Call (213) 577-1120 for a free measure and a written price.
Get a Written Price for Gate Installation in Burbank
If your Burbank gate is sagging, failing, or simply old enough that you want a reliable install, we’ll come measure, talk through options, and put a written price in your hand before any work begins. No verbal estimate followed by a surprise invoice. No pushing a replacement when a repair makes sense. A live person answers the phone 24/7 at (213) 577-1120, and every visit includes a documented photo record of what was found, what was set, and what was installed. Call today and get Burbank’s most straightforward gate install on the schedule.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Burbank since 2014.
Gate Installation in Nearby Areas
