Electric Gate Repair in Burbank, CA

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Electric Gate Repair in Burbank, CA

Electric gate repair in Burbank typically costs between $185 and $450 for standard electrical diagnostics, limit switch adjustments, and photo-eye alignments. If the motor control board requires replacement or complex internal wiring repairs are necessary, costs often range from $450 to $950 depending on the specific model and part availability. At Vance Gate Repair Burbank, we provide a written price before any work begins through our Gate Repair services, so you know exactly what the repair costs before we pick up a tool. If your gate is stuck, making grinding noises, or failing to respond to your remote, call us at (213) 577-1120 for an immediate assessment.

We operate under the Haven Standard, which means we do not guess at problems. Our technicians arrive with the tools to diagnose and document your system, whether you are dealing with a faulty circuit board on a Viking unit or a misaligned sensor on a Linear system. We handle all aspects of Gate Repair for residential and light commercial properties across Burbank, ensuring that every wire, limit switch, and safety sensor is accounted for in our final photo log.

When You Need Electric Gate Repair

Electric gates are complex systems involving high-voltage power, sensitive low-voltage control boards, and mechanical components that wear down over time. In Burbank, we often see issues caused by the dry heat and dust accumulation in the motor housing, which can interfere with electrical connections. You should call us when you notice these specific signs of failure:

• The gate hums but does not move: This often points to a failed capacitor or a seized motor bearing. If the motor is getting power but the gate remains stationary, do not force it manually, as this can damage the internal gearing.
• The gate reverses immediately after closing: This is a classic symptom of a misaligned or faulty photo-eye. These infrared sensors are critical safety features; if they cannot “see” each other, the control board assumes an obstruction is in the way and stops the gate.
• Intermittent remote response: If you have to be right next to the gate for the remote to work, the issue is often a degraded radio receiver or a failing antenna connection within the control box.
• The gate stops at the wrong position: If your gate travels too far or stops short, the limit switch (the sensor that tells the motor where the gate ends) has likely slipped. We see this frequently on older FAAC and BFT motors exposed to temperature fluctuations.
• The control board shows a fault code: Modern gate motors, such as those from DoorKing or LiftMaster, will often flash a specific code on the circuit board when they detect an electrical anomaly. Do not reset the board until the underlying cause-like a shorted wire-is identified.

Because these systems involve high-tension springs and electrical components, we advise against attempting to “jumper” the safety sensors or bypass the control board yourself. A live wire or a mismanaged release lever can cause significant injury or permanent damage to the motor assembly. If you aren’t sure why your gate is acting up, call (213) 577-1120 and let us handle the diagnostics.

Our Electric Gate Repair Process

We do not operate on verbal agreements or vague estimates. Every visit follows our documented process, ensuring you have a clear record of what was repaired and why. This is how we handle every Gate Repair Near Me in Burbank, CA:

1. Visual Inspection and Power Check: We arrive and immediately verify the power source. We test the voltage at the main breaker and the control board input to ensure the gate is receiving the correct amperage.
2. Diagnostic Documentation (Clause 4): Before we touch a component, we photograph the current state of your wiring and settings. This becomes part of your permanent file, so if another technician ever works on your gate, they don’t have to guess what we did.
3. Written Scope and Price: We present a written document detailing exactly what we found, what parts are needed, and the total cost. You sign this document before we begin, fulfilling Haven Standard Clause 1.
4. Component Repair or Replacement: Whether we are soldering a broken connection on a BFT circuit board or replacing a worn-out limit switch, we work methodically. We test the repair through at least ten full cycles to ensure consistency.
5. Final Photo Log and Verification: Once the repair is complete, we photograph the new settings and the installed parts. You receive this photo log along with your invoice, giving you a complete history of the work performed.

Before

After

Electric Gate Repair Pricing in Burbank

We believe in upfront, transparent pricing. You will never be surprised by a bill after the work is done. While exact costs depend on the specific motor brand and the complexity of the electrical fault, see our guide on How Much Does Gate Repair Cost? (2026 Price Guide) - Burbank, CA for typical price ranges.

If another company has provided you with a written estimate, we offer a free second opinion. Bring the paperwork to us, and we will review their findings against your system to ensure you aren’t paying for unnecessary parts or labor. Call (213) 577-1120 to schedule your appointment.

FAQs - Electric Gate Repair

Can you repair my gate motor if it isn’t one of the major brands?

We service nine major automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate uses a less common or older motor, we can still perform diagnostics to identify if the issue is electrical or mechanical, but we will be upfront with you about parts availability before we start any work. Call (213) 577-1120 to discuss your specific motor model.

Is it cheaper to repair or replace my gate motor?

In most cases, Gate Realignment and repairing the existing motor is more cost-effective, especially if the internal gears and housing are in good condition. We only recommend replacement if the control board is obsolete, the motor housing is severely corroded, or the cost of the repair exceeds 50% of a new installation. We provide a full cost breakdown so you can make an informed decision.

Do you offer a warranty on your repair work?

Yes, every job we complete is covered by our 365-Day Done Right Promise. If the repair we performed fails within one year, we will come back and make it right at no additional charge. This is our commitment to quality, ensuring that you don’t pay twice for the same issue.

Can you come out today if my gate is stuck in the open position?

We understand that a gate stuck in the open position is a security risk, and we prioritize these calls. Because we have a live person answering the phone 24 hours a day, you can reach us at any time to schedule a technician. We do not use voicemail loops, so you will always get a direct response when you need help.

If you are ready to get your electric gate working properly, we are ready to help. Our team provides documented, honest service to ensure your gate remains safe and functional. Contact us at (213) 577-1120 for a free estimate or to schedule your service visit.

Written by Adrian Vance, Owner at Vance Gate Repair Burbank, serving Burbank.